A/D Convertor with Remote Preamp

Model: AD8HR

Awe-inspiring sound quality derived from the PM5000 with sampling rates of up to 96kHz
Head Amp Remote Control allows a high-degree of integration with digital mixers
Eight XLR connectors and standard AES/EBU terminals packed into a compact 1U design

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The model AD8HR is an eight-channel analog-to-digital converter supporting sampling rates of up to 96kHz and Head Amp Remote Control from the DM2000 and DM1000. A new AD converter combining unparalleled sound quality with a host of innovative functions. The AD8HR’s mic pre-amp can be remotely controlled in steps of 1 dB from digital mixing consoles such as the DM2000 and DM1000, and with a high pass filter and a phantom power supply integrated into each channel, both the filter and phantom power can be turned on and off by remote control, as can the filter’s cut-off frequency.

Awe-inspiring sound quality derived from the PM5000 with sampling rates of up to 96kHz
Head Amp Remote Control allows a high-degree of integration with digital mixers
Eight XLR connectors and standard AES/EBU terminals packed into a compact 1U design

Crosstalk: Less than -80dB between adjacent channels at 1kHz
Depth: 13.90 in 353.5 mm
Dynamic Range: 110dB (typical), +10dB (gain)
Frequency Response: 20Hz to 20kHz (at 44.1kHz, 48kHz -3, +1dB, -62dB Gain), 20Hz to 40kHz (at 88.2kHz, 96kHz -3, +1dB, -62dB Gain) (input 1-8 to digital out 1-8)
Height: 1.70 in 44 mm
Power Consumption: 35 W
Power Requirements: 120Vac, 60Hz
Sampling Rate: 44.1, 48, 88.2, 96 kHz
Total Harmonic Distortion: (Less than 0.05%, -1dBFs outputat 1kHz/-62dB Gain), (Less than 0.01%, -1dBFs outputat 1kHz/+10dB Gain)
Width: 18.90 in 480 mm
Phantom Power: +48V
Equvalent Input Noise: <-128dB (Rs=150 Ohms, -62dB Gain)
Maximum load protection: 11 lbs
Number of Channels: 8